-
10
Jan, 2022
The most important lead-based alloys are lead-tin alloys. This alloy has a light gray metallic luster, is softer, and has a lower porosity than a single layer of lead or tin.
-
05
Jan, 2022
What is electroplating lead-tin alloy
Lead-tin alloy plating is widely used in industry. By changing the concentration ratio of two metal ions in the plating solution
-
30
Dec, 2021
Bismuth is mainly used in the manufacture of fusible alloys, with a melting point ranging from 47 to 262 °C.
-
25
Dec, 2021
Specific application areas of low melting point alloys
Low melting point alloys are used in medical treatment and are mainly used to make special blocks for radiation protection of specific shapes.
-
20
Dec, 2021
Physical properties of low melting point alloys
Low melting point alloys are gray-white shiny metals and a class of fusible alloys based on bismuth element.
-
15
Dec, 2021
Introduction of lead-tin alloy electroplating in PCB industry printed circuit...
In the process of printing circuit boards, the surface of the steel strip usually has a plating printing process for lubrication, bonding and soldering.
-
10
Dec, 2021
What are the performance characteristics of lead-tin alloys?
Lead-tin alloy has stable performance, low melting point, good fluidity and small shrinkage.
-
05
Dec, 2021
Solidification of precision castings
The solidification of precision castings is more important for castings. Generally, the solidification methods of castings are divided into two methods
-
30
Nov, 2021
Understand the properties and uses of gallium in one minute
The properties of metal gallium: element symbol Ga, atomic number 31, is a group IIIA metal. The density is 5.904 g/cm³, the melting point is 29.76°C (302.91 K, 85.57°F)
-
25
Nov, 2021
Application areas of gallium alloys
Gallium and indium, thallium, tin, bismuth, zinc, etc. can form a series of low-melting alloys between 3 °C and 65 °C
-
20
Nov, 2021
Three advantages of tin-bismuth alloy
Compared with aluminum alloy, steel and iron, it has a lower elastic modulus. Under the same stress conditions, tin-bismuth alloy can consume more deformation work
-
15
Nov, 2021
Development of low melting point alloys
Foreign countries attach great importance to the research and use of low melting point mold alloys.