Our current challenge is to do everything we can to facilitate getting our gallium indium pure, 158F 70C low melt alloys, Indium tin solder to market, starting and expanding new businesses, and training and hiring new employees. We still uphold the belief of striving to repay the society, and continue to work hard to promote intelligent life, green ecological cycle and benefit the society. We have been committed to the development and manufacture of new products, and put them into market use, our company can tailor-made equipment for customers. Only we have better and better quality, could we achieve our customers and ourselves, too. The company always insists on the market value of "the user is always right" and the market concept of "only looking for products for customers, not looking for customers for products".

What is Aluminum alloy die casting?

Aluminum alloy die casting is a precision casting method that uses high pressure to pour aluminum alloy into mold with complex shapes. Aluminum alloy has excellent fluidity and ductility, so it can make various castings with complicated shapes and large coefficients of difficulty, and the castings have high precision and surface smoothness. Because of its high essential and external quality, aluminum alloy die casting is widely used in the automotive industry, gas turbine manufacturing, motorcycle manufacturing, motor manufacturing, transmission system mechanical equipment manufacturing, instrumentation, garden landscape cleaning, and construction engineering and other manufacturing industries.

The advantages of aluminum alloy die casting:

1. High dimensional accuracy, good quality surface. Good surface roughness and small thermal cracking and good interchangeability.

2. Good fluidity and moldability, can produce various difficult die castings with complex shapes, clear contours, deep cavities and thin walls.

3. Precise organization, high strength and hardness. It has good mechanical properties at high and normal temperatures, especially the impact toughness. Due to the short filling time of molten alloy, it is cooled quickly in the die-casting mold and condenses under high pressure at the same time, so that the metal crystal grains on the surface of the die-casting part are finer. The structure is dense, so that the die casting has higher strength, hardness and wear resistance.

4. High material utilization rate. It can be used directly without or with a small amount of mechanical processing. The gross utilization rate is above 90%.

5. High production efficiency, suitable for mass production.

6. Good economic benefits, good electrical and thermal conductivity, and good mechanical cutting performance. Due to the precise size of the die-casting parts, good surface quality, small machining allowance or can be assembled without machining, machining equipment and machining man-hours are reduced, and better economic benefits can be obtained.

Wochang has experienced aluminum die casting engineers team, professional production staff, quality control team, and constantly updates our production equipment to ensure that we provide customers products with the highest quality and the best price.

At present, Wochang has10 sets aluminum die casting machine from 168T to 800T for 24-hour production, which can meet the production needs of large or small order quantity .At the same time, the company has its own surface treatment department, no external processing required, and can be save more cost and delivered faster than other factories.

If you need the customization of aluminum die casting, please feel free to contact us for free quotation.

FAQ:

Q1. Are you manufacturer?

Yes, original manufacturer, located in Dongguan, close to Shenzhen and Guangzhou.

Q2. Sample time?

It's based on the product size and structure, usually the lead time is 25-30 days from the mould design confirmed to sample finished.

Q3. How to control the quality?

We have QC department, 100% QC for each step.

Q4. MOQ?

It depends on the size, usually is 3000pcs, if the size is small, MOQ will be more..

Q5. How could I get a quotation?

The details of price based on your product drawing, order quantity, product material，surface-treatment and packing. So if you need quotation plz send us your 3D drawing(stp, step, or igs format) and tell us details of you product.

Q6. Payment?

By T/T bank transfer, 40% deposit, the balance before shipping.

With our leading technology at the same time as our spirit of innovation, mutual cooperation, benefits and growth, we're going to build a prosperous future together with your esteemed firm for Chrome-Plating ADC12 Aluminum Die Casting for LED Lamp Cover. Our price advantage comes from cost control, from material entering the factory to finished product shipment, all production links are equipped with experienced professionals. We carry out special technical activities to establish long-term quality files, continuously improve and enhance production skills, and establish and improve various rules and regulations.